PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8840182
8840182 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 0.600 INCHES NOMINAL IN, inside_diameter_length: 0.680 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 0.364 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-882-2883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8840182
NSN: 5340-00-882-2883
FSC: 5340
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter0.600 INCHES NOMINAL IN
inside_diameter_length0.680 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed0.364 INCHES NOMINAL IN
NSN5340-00-882-2883
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8840182 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.600 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 0.680 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.364 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
OVERALL DIAMETER0.600 INCHES NOMINAL IN
MATERIALPLASTIC
INSIDE DIAMETER LENGTH0.680 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.364 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
85-1008-01 AND 16-9003-01Interchangeable
interchangeable cross-reference
interchangeable
B362Interchangeable
interchangeable cross-reference
interchangeable
2-39000Interchangeable
interchangeable cross-reference
interchangeable
1510-36-102Interchangeable
interchangeable cross-reference
interchangeable
7376460-01Interchangeable
interchangeable cross-reference
interchangeable
7376460-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8840182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8840182?
8840182 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 8840182?
There are 8 known substitutes for 8840182: 85-1008-01 AND 16-9003-01, B362, 2-39000 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8840182?
8840182 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-882-2883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8840182

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026