Name: BAG BLADDER,BLEEDING SIMULATION
Brand: Unknown
SKU: 8840

8840 ✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter

Verify connector type on BOTH ends — many SAS cables are asymmetric

PRODUCT OVERVIEW

BAG BLADDER,BLEEDING SIMULATION. Key specifications include overall_width: 5.89 INCHES NOMINAL IN, overall_height: 9.49 INCHES NOMINAL IN, overall_length: 5.00 INCHES NOMINAL IN, special_features: VOLTAGE RATING: 115.00 VAC TO 230.00 VAC; FREQUENCY: 60.00 HZ; VAC, end_item_identification: WINCH,ELECTRIC,PORTABLE MODEL: CSW-7-C10-C23X14-B;, part_name_assigned_by_controlling_agency: FULL WAVE 4 QUADRANT REGENERATIVE DRIVE FOR SPEED AND TORQUE CONTROL;. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-168-5174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 8840

NSN: 5998-00-168-5174
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 21856 — CENTROID, INC. DBA CENTROID INC (USA)

SPECIFICATIONS

overall_width	5.89 INCHES NOMINAL IN
overall_height	9.49 INCHES NOMINAL IN
overall_length	5.00 INCHES NOMINAL IN
special_features	VOLTAGE RATING: 115.00 VAC TO 230.00 VAC; FREQUENCY: 60.00 HZ; VAC
end_item_identification	WINCH,ELECTRIC,PORTABLE MODEL: CSW-7-C10-C23X14-B;
part_name_assigned_by_controlling_agency	FULL WAVE 4 QUADRANT REGENERATIVE DRIVE FOR SPEED AND TORQUE CONTROL;
NSN	5998-00-168-5174

COMPONENT DIAGRAM

TECHNICAL CHARACTERISTICS (FLIS)

OVERALL WIDTH	3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN
SPECIAL FEATURES	PRINTED WIRING BOARD 1,INTEGRATED CIRCUIT 17,CAPACITOR 5,DIODE 5,TRANSISTOR 2,RELAY 2,RESISTOR 16,COIL RADIO FREQUENCY 1
OVERALL HEIGHT	0.544 INCHES NOMINAL IN
OVERALL LENGTH	5.990 INCHES MINIMUM AND 6.010 INCHES MAXIMUM IN
OVERALL WIDTH	3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN
SPECIAL FEATURES	PRINTED WIRING BOARD 1,INTEGRATED CIRCUIT 17,CAPACITOR 5,DIODE 5,TRANSISTOR 2,RELAY 2,RESISTOR 16,COIL RADIO FREQUENCY 1
OVERALL HEIGHT	0.544 INCHES NOMINAL IN
OVERALL LENGTH	5.990 INCHES MINIMUM AND 6.010 INCHES MAXIMUM IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 11

CA0438-003Upgraded Successor

successor cross-reference

successor

8840Upgraded Successor

successor cross-reference

successor

2810H21-001Interchangeable

interchangeable cross-reference

interchangeable

131064Interchangeable

interchangeable cross-reference

interchangeable

968Interchangeable

interchangeable cross-reference

interchangeable

DR12Interchangeable

interchangeable cross-reference

interchangeable

LIFECYCLE

StatusACTIVE

AvailabilityOEM and secondary market

RoHS CompliantEAR99ESD SensitiveNot HAZMAT

Ready to buy 8840?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 8840?

8840 is a BAG BLADDER,BLEEDING SIMULATION. It is classified as a MRO (MRO_GENERAL).

What parts can replace 8840?

There are 11 known substitutes for 8840: CA0438-003, 8840, 2810H21-001 and 8 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 8840?

8840 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-168-5174. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

Comments (0)

No comments yet. Be the first to share what you know.

Request a Quote — 8840