PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 883335
883335 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, special_features: HOLE TAPPED 10-32 THRU CENTER,0.375 IN. DIA COUNTERBORE TO 0.093 IN.

DEPTH,0.196 IN. DIA COUNTERBORE OPPOSITE SIDE IN, surface_treatment: CADMIUM OVERALL, pin_overall_length: 1.750 INCHES NOMINAL IN, first_hole_diameter: 0.159 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-291-8518, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
883335
NSN: 5315-00-291-8518
FSC: 5315
CAGE: 83298 — ALLIED SIGNAL INC AEROSPACE EQUIPMENT SYSTEMS EATONTOWN SITE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
special_featuresHOLE TAPPED 10-32 THRU CENTER,0.375 IN. DIA COUNTERBORE TO 0.093 IN. DEPTH,0.196 IN. DIA COUNTERBORE OPPOSITE SIDE IN
surface_treatmentCADMIUM OVERALL
pin_overall_length1.750 INCHES NOMINAL IN
first_hole_diameter0.159 INCHES NOMINAL IN
pin_overall_diameter0.3120 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
hole_arrangement_styleDRILLED THRU CENTER
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-291-8518
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 883335 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.3120 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PIN OVERALL LENGTH: 1.750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
HOLE ARRANGEMENT STYLE: DRILLED THRU CENTER
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.3120 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
PIN OVERALL LENGTH1.750 INCHES NOMINAL IN
SPECIAL FEATURESHOLE TAPPED 10-32 THRU CENTER,0.375 IN. DIA COUNTERBORE TO 0.093 IN. DEPTH,0.196 IN. DIA COUNTERBORE OPPOSITE SIDE IN
MATERIALSTEEL OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
HOLE ARRANGEMENT STYLEDRILLED THRU CENTER
FIRST HOLE DIAMETER0.159 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
83335Interchangeable
interchangeable cross-reference
interchangeable
U9491-5Interchangeable
interchangeable cross-reference
interchangeable
755002A7742-5 87990Interchangeable
interchangeable cross-reference
interchangeable
72008Interchangeable
interchangeable cross-reference
interchangeable
83335 2INInterchangeable
interchangeable cross-reference
interchangeable
CME4-03-STW-2019Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 883335?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 883335?
883335 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 883335?
There are 7 known substitutes for 883335: 83335, U9491-5, 755002A7742-5 87990 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 883335?
883335 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-291-8518. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 883335

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026