PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 883062

883062 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include end_item_identification: KC-46A SUPPORT EQUIPMENT A, part_name_assigned_by_controlling_agency: WASHER,NYLON. This part is cataloged in the Federal Logistics Information System under NSN 5310-00-705-8965, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
883062
NSN: 5310-00-705-8965
FSC: 5310
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
end_item_identificationKC-46A SUPPORT EQUIPMENT A
part_name_assigned_by_controlling_agencyWASHER,NYLON
NSN5310-00-705-8965
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 883062 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
BEARING SURFACE TYPE: FLAT
•
THREAD QUANTITY PER INCH: 32
•
WIDTH ACROSS FLATS: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY 360 OVERALL
TECHNICAL CHARACTERISTICS
THREAD CLASS2B
THREAD DIRECTIONRIGHT-HAND
THREAD SERIESUNF
NOMINAL THREAD SIZE0.190 INCHES IN
BEARING SURFACE TYPEFLAT
THREAD QUANTITY PER INCH32
WIDTH ACROSS FLATS0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 360 OVERALL
NUT HEIGHT0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 72 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
75072InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
BUWEPSDWG2075603InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
L535000178InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2075603InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
71387InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
93-540-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 883062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 883062?
883062 is a WASHER,FLAT.
What parts can replace 883062?
There are 17 known substitutes for 883062: 75072, BUWEPSDWG2075603, L535000178 and 14 more. Substitute compatibility should be verified for your specific system.
Is 883062 still available?
883062 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 883062

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026