PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 882519071
882519071 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,SELF-DRILLING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON EXTENDED WASHERHEXAGON EXTENDED WASHER, head_height: 0.105 INCHES MINIMUM AND 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN, point_style: SELF-DRILLINGSELF-DRILLING, pilot_length: 0.30 INCHES NOMINAL0.30 INCHES NOMINAL IN, fastener_length: 0.50 INCHES NOMINAL0.50 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-605-4408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
882519071
NSN: 5305-01-605-4408
FSC: 5305
CAGE: 1QCU7 — VIKING BOLT INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON EXTENDED WASHERHEXAGON EXTENDED WASHER
head_height0.105 INCHES MINIMUM AND 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
point_styleSELF-DRILLINGSELF-DRILLING
pilot_length0.30 INCHES NOMINAL0.30 INCHES NOMINAL IN
fastener_length0.50 INCHES NOMINAL0.50 INCHES NOMINAL IN
special_featuresDRILLING POINT IS STYLE TEK3DRILLING POINT IS STYLE TEK3
thread_directionRIGHT-HANDRIGHT-HAND
surface_treatmentZINC OVERALL
width_between_flats0.305 INCHES MINIMUM AND 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM0.312 INCHES MAXIMUM IN
internal_drive_styleW/O INTERNAL DRIVEW/O INTERNAL DRIVE
end_item_identification4320-01-533-64174320-01-533-6417
NSN5305-01-605-4408
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 882519071 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT STYLE: SELF-DRILLINGSELF-DRILLING
•
MATERIAL: STEEL OVERALL
•
EXTENDED WASHER THICKNESS: 0.019 INCHES MINIMUM AND 0.019 INCHES MINIMUM AND 0.031 INCHES MAXIMUM0.031 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HANDRIGHT-HAND
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
•
HEAD STYLE: HEXAGON EXTENDED WASHERHEXAGON EXTENDED WASHER
•
PILOT LENGTH: 0.30 INCHES NOMINAL0.30 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
POINT STYLESELF-DRILLINGSELF-DRILLING
MATERIALSTEEL OVERALL
EXTENDED WASHER THICKNESS0.019 INCHES MINIMUM AND 0.019 INCHES MINIMUM AND 0.031 INCHES MAXIMUM0.031 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
HEAD STYLEHEXAGON EXTENDED WASHERHEXAGON EXTENDED WASHER
PILOT LENGTH0.30 INCHES NOMINAL0.30 INCHES NOMINAL IN
END ITEM IDENTIFICATION4320-01-533-64174320-01-533-6417
FASTENER LENGTH0.50 INCHES NOMINAL0.50 INCHES NOMINAL IN
NONMACHINE THREAD STYLESELF DRILLINGSELF DRILLING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
324119-2Interchangeable
interchangeable cross-reference
interchangeable
10215944Interchangeable
interchangeable cross-reference
interchangeable
SR-6P3-4Interchangeable
interchangeable cross-reference
interchangeable
28-564Interchangeable
interchangeable cross-reference
interchangeable
8557Interchangeable
interchangeable cross-reference
interchangeable
V5043Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 882519071?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 882519071?
882519071 is a SCREW,SELF-DRILLING.
What parts can replace 882519071?
There are 12 known substitutes for 882519071: 324119-2, 10215944, SR-6P3-4 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 882519071?
882519071 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-605-4408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 882519071

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026