PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8823596
8823596 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include overall_width: 0.450 INCHES NOMINAL IN, overall_height: 0.030 INCHES NOMINAL IN, overall_length: 0.450 INCHES NOMINAL IN, style_designator: FLAT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-7229, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8823596
NSN: 5340-00-290-7229
FSC: 5340
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)
SPECIFICATIONS
overall_width0.450 INCHES NOMINAL IN
overall_height0.030 INCHES NOMINAL IN
overall_length0.450 INCHES NOMINAL IN
style_designatorFLAT
NSN5340-00-290-7229
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8823596 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPEN END INSIDE DIAMETER: 3.078 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 0.750 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
•
CLOSED END OVERALL DIAMETER: 2.995 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OPEN END INSIDE DIAMETER3.078 INCHES NOMINAL IN
LENGTH UNDER SHOULDER0.750 INCHES NOMINAL IN
MATERIALPLASTIC
CLOSED END OVERALL DIAMETER2.995 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
MILC52078Upgraded Successor
successor cross-reference
successor
RU51089Upgraded Successor
successor cross-reference
successor
28901-17Upgraded Successor
successor cross-reference
successor
21Upgraded Successor
successor cross-reference
successor
MIL-C-5501Upgraded Successor
successor cross-reference
successor
57AUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8823596?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8823596?
8823596 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 8823596?
There are 25 known substitutes for 8823596: MILC52078, RU51089, 28901-17 and 22 more. Substitute compatibility should be verified for your specific system.
Is 8823596 still available?
8823596 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8823596

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026