PartsTable
Technical Data Sheet
Download PDF

881338 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

881338: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR W/ROUNDED CORNERS, width: 9.000 INCHES NOMINAL IN, length: 14.750 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, thickness: 0.250 INCHES NOMINAL IN, special_features: COLOR: 383 GREEN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-570-9043, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
881338
NSN: 5340-01-570-9043
FSC: 5340 — Hardware, Commercial
CAGE: 11982 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
shapeRECTANGULAR W/ROUNDED CORNERS
width9.000 INCHES NOMINAL IN
length14.750 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
thickness0.250 INCHES NOMINAL IN
special_featuresCOLOR: 383 GREEN
surface_treatmentPAINT
mounting_hole_typeUNTHREADED
end_item_identificationM93 FOX
part_name_assigned_by_controlling_agencyASSEMBLY,PLATE,DISPLAY MOUNTING
NSN5340-01-570-9043
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 881338 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 14.750 INCHES NOMINAL IN
•
SHAPE: RECTANGULAR W/ROUNDED CORNERS
•
SURFACE TREATMENT: PAINT
•
WIDTH: 9.000 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS
LENGTH14.750 INCHES NOMINAL IN
SHAPERECTANGULAR W/ROUNDED CORNERS
SPECIAL FEATURESCOLOR: 383 GREEN
SURFACE TREATMENTPAINT
WIDTH9.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYASSEMBLY,PLATE,DISPLAY MOUNTING
END ITEM IDENTIFICATIONM93 FOX
MATERIALALUMINUM ALLOY 6061
THICKNESS0.250 INCHES NOMINAL IN
MOUNTING HOLE TYPEUNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
881338-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 881338?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 881338?
881338 is a PLATE,MOUNTING.
What parts can replace 881338?
There is 1 known substitute for 881338: 881338-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 881338?
881338 is cataloged in the U.S. Government catalog under NSN 5340-01-570-9043. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 881338