PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 881167-0001
881167-0001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, hole_diameter: 0.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 3.469 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 2.312 INCHES NOMINAL IN, bolt_circle_diameter: 3.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-027-4710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
881167-0001
NSN: 5330-01-027-4710
FSC: 5330
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
hole_diameter0.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter3.469 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter2.312 INCHES NOMINAL IN
bolt_hole_quantity4
bolt_circle_diameter3.000 INCHES NOMINAL IN
cross-sectional_thickness0.004 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-027-4710
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 881167-0001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.469 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT CIRCLE DIAMETER: 3.000 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
•
APERTURE DIAMETER: 2.312 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
HOLE DIAMETER: 0.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.469 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT CIRCLE DIAMETER3.000 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
APERTURE DIAMETER2.312 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
HOLE DIAMETER0.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL THICKNESS0.004 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
GB511AB9-30Interchangeable
interchangeable cross-reference
interchangeable
57510Interchangeable
interchangeable cross-reference
interchangeable
2GL754Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 881167-0001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 881167-0001?
881167-0001 is a GASKET.
What parts can replace 881167-0001?
There are 3 known substitutes for 881167-0001: GB511AB9-30, 57510, 2GL754. Substitute compatibility should be verified for your specific system.
What is the NSN for 881167-0001?
881167-0001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-027-4710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 881167-0001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026