881151: MOTOR,HYDRAULIC.
The MOTOR,HYDRAULIC is a the manufacturer industrial component. Key specifications include spline_pitch: 8/16, spline_length: 2.940 INCHES NOMINAL IN, spline_quantity: 13, displacement_type: CONSTANT, spline_major_diameter: 1.747 INCHES MINIMUM AND 1.748 INCHES MAXIMUM IN, shaft_rotation_direction: CLOCKWISE AND COUNTERCLOCKWISE. This part is cataloged in the U.S.
Government catalog under NSN 1650-01-307-1021, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| spline_pitch | 8/16 |
| spline_length | 2.940 INCHES NOMINAL IN |
| spline_quantity | 13 |
| displacement_type | CONSTANT |
| spline_major_diameter | 1.747 INCHES MINIMUM AND 1.748 INCHES MAXIMUM IN |
| shaft_rotation_direction | CLOCKWISE AND COUNTERCLOCKWISE |
| constant_displacement_per_revolution | 1.200 CUBIC INCHES |
| operating_speed_at_rated_capacity_in_rpm | 3200.0 |
| reference_number_differentiating_characteristics | AS DIFFERENTIATED BY THE SOURCE CONTROL DWG NO. |
| maximum_working_pressure_rating_at_specified_temp_range | 6000PSI AT MINUS 200 DEG F DEGF |
| NSN | 1650-01-307-1021 |
| SPLINE PITCH | 8/16 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 1.200 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| SPLINE LENGTH | 2.940 INCHES NOMINAL IN |
| SPLINE MAJOR DIAMETER | 1.747 INCHES MINIMUM AND 1.748 INCHES MAXIMUM IN |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE QUANTITY | 13 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 6000PSI AT MINUS 200 DEG F DEGF |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3200.0 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE SOURCE CONTROL DWG NO. |