PartsTable
Technical Data Sheet
Download PDF

8811-0725 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

8811-0725: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, pitch_diameter: 2.6250 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES, teeth_quantity: 63. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-358-8667, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8811-0725
NSN: 3020-01-358-8667
NIINs: 013588667, 013634379
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 12115 — DRS ICAS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
pitch_diameter2.6250 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity63
style_designatorPROTRUDING HUB
surface_treatmentPASSIVATE OVERALL
face_nominal_width0.620 INCHES IN
hub_nominal_diameter1.500 INCHES FIRST END IN
hub_style_designatorPINNED FIRST END
bore_nominal_diameter0.750 INCHES FIRST END IN
NSN3020-01-358-8667
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN 8811-0725 MFR GEAR,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.750 INCHES FIRST END IN
•
HUB NOMINAL DIAMETER: 1.500 INCHES FIRST END IN
•
TEETH QUANTITY: 63
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.630 INCHES FIRST END IN
•
STYLE DESIGNATOR: PROTRUDING HUB
•
PITCH DIAMETER: 2.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.750 INCHES FIRST END IN
HUB NOMINAL DIAMETER1.500 INCHES FIRST END IN
TEETH QUANTITY63
BODY STYLEPLAIN, SOLID
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.630 INCHES FIRST END IN
STYLE DESIGNATORPROTRUDING HUB
PITCH DIAMETER2.6250 INCHES NOMINAL IN
HUB STYLE DESIGNATORPINNED FIRST END
NOMINAL OUTSIDE DIAMETER2.708 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
8811-0725-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8811-0725?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8811-0725?
8811-0725 is a GEAR,SPUR.
What parts can replace 8811-0725?
There is 1 known substitute for 8811-0725: 8811-0725-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 8811-0725?
8811-0725 is cataloged in the U.S. Government catalog under NSN 3020-01-358-8667. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8811-0725

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.