PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 88036X1H
88036X1H ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 6.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.4970 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
88036X1H
NSN: 3110-00-198-2070
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter6.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.4970 INCHES NOMINAL IN
outer_ring_width0.3150 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter19.00 MILLIMETERS NOMINAL MM
NSN3110-00-198-2070
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 88036X1H · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
BEARING SEAL TYPE: CONTACT
•
BORE SHAPE: STRAIGHT
•
INNER RING WIDTH: 0.4970 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
SURFACE FINISH: GROUND
•
SEAL QUANTITY: 2
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BEARING SEAL TYPECONTACT
BORE SHAPESTRAIGHT
INNER RING WIDTH0.4970 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONLOOSE
SURFACE FINISHGROUND
SEAL QUANTITY2
LOAD DIRECTIONRADIAL
OUTER RING WIDTH0.3150 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2-300-387-06Interchangeable
interchangeable cross-reference
interchangeable
5330PL2122765Interchangeable
interchangeable cross-reference
interchangeable
4-287-08Interchangeable
interchangeable cross-reference
interchangeable
6754299Interchangeable
interchangeable cross-reference
interchangeable
79042Interchangeable
interchangeable cross-reference
interchangeable
S8555Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 88036X1H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88036X1H?
88036X1H is a BEARING,BALL,ANNULAR.
What parts can replace 88036X1H?
There are 15 known substitutes for 88036X1H: 2-300-387-06, 5330PL2122765, 4-287-08 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 88036X1H?
88036X1H is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2070. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88036X1H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026