PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 88014ND
88014ND ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 14.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.5670 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3463, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
88014ND
NSN: 3110-00-156-3463
FSC: 3110
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter14.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.5670 INCHES NOMINAL IN
outer_ring_width0.4330 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-3463
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 88014ND · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.4330 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
INNER RING WIDTH: 0.5670 INCHES NOMINAL IN
•
SEAL QUANTITY: 2
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING WIDTH0.4330 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
INNER RING WIDTH0.5670 INCHES NOMINAL IN
SEAL QUANTITY2
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
300211Interchangeable
interchangeable cross-reference
interchangeable
88014Interchangeable
interchangeable cross-reference
interchangeable
122X489Interchangeable
interchangeable cross-reference
interchangeable
125B417Interchangeable
interchangeable cross-reference
interchangeable
GSH0007 IT 6Interchangeable
interchangeable cross-reference
interchangeable
B-10067Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 88014ND?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88014ND?
88014ND is a BEARING,BALL,ANNULAR.
What parts can replace 88014ND?
There are 9 known substitutes for 88014ND: 300211, 88014, 122X489 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 88014ND?
88014ND is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3463. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88014ND

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026