PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 880112-6D
880112-6D ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The ELBOW,TUBE TO HOSE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, flow_angle: 45.0 DEGREES, leg_length: 2.130 INCHES MAXIMUM ALL ENDS IN, seat_angle: 12.0 DEGREES FIRST END, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-526-5982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
880112-6D
NSN: 4730-01-526-5982
FSC: 4730
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
flow_angle45.0 DEGREES
leg_length2.130 INCHES MAXIMUM ALL ENDS IN
seat_angle12.0 DEGREES FIRST END
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
connection_styleGRIPPING NIPPLE (NOSE) SECOND END
surface_treatmentANODIZE OVERALL
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.562 INCHES FIRST END IN
maximum_operating_temp250.0 FAHRENHEIT SINGLE RESPONSE DEGF
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
NSN4730-01-526-5982
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 880112-6D · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MEDIA FOR WHICH DESIGNED: HYDRAULIC FLUID SINGLE RESPONSE
•
SEAT ANGLE: 12.0 DEGREES FIRST END
•
SPECIFICATION/STANDARD DATA: 81349-MIL-DTL-83798/5 GOVERNMENT SPECIFICATION
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.469 INCHES FIRST END IN
•
FLOW ANGLE: 45.0 DEGREES
•
OPERATING PRESSURE: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY OVERALL
SURFACE TREATMENTANODIZE OVERALL
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID SINGLE RESPONSE
SEAT ANGLE12.0 DEGREES FIRST END
SPECIFICATION/STANDARD DATA81349-MIL-DTL-83798/5 GOVERNMENT SPECIFICATION
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.469 INCHES FIRST END IN
FLOW ANGLE45.0 DEGREES
OPERATING PRESSURE1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TEST DATA DOCUMENT81349-MIL-DTL-83798 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
M83798/5-12Interchangeable
interchangeable cross-reference
interchangeable
880112-12DInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83798/5Interchangeable
interchangeable cross-reference
interchangeable
136-2045-16DInterchangeable
interchangeable cross-reference
interchangeable
25636-16-16DInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83798Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 880112-6D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 880112-6D?
880112-6D is a ELBOW,TUBE TO HOSE.
What parts can replace 880112-6D?
There are 15 known substitutes for 880112-6D: M83798/5-12, 880112-12D, MIL-DTL-83798/5 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 880112-6D?
880112-6D is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-526-5982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 880112-6D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026