PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8800770
8800770 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, plate_width: 3.000 INCHES NOMINAL IN, plate_length: 4.063 INCHES NOMINAL IN, hole_diameter: 0.193 INCHES NOMINAL IN, inside_length: 4.188 INCHES NOMINAL IN, stock_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-857-3613, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8800770
NSN: 5340-00-857-3613
FSC: 5340
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
plate_width3.000 INCHES NOMINAL IN
plate_length4.063 INCHES NOMINAL IN
hole_diameter0.193 INCHES NOMINAL IN
inside_length4.188 INCHES NOMINAL IN
stock_diameter0.375 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
handle_clearance2.063 INCHES NOMINAL IN
special_featuresFURNISHED W/8 SCREWS
style_designatorDELTA OPEN
surface_treatmentZINC OVERALL
mounting_plate_styleRAISED
NSN5340-00-857-3613
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8800770 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.193 INCHES NOMINAL IN
•
DISTANCE BETWEEN ENDS: 1.000 INCHES NOMINAL IN
•
MOUNTING PLATE STYLE: RAISED
•
SURFACE TREATMENT: ZINC OVERALL
•
STYLE DESIGNATOR: DELTA OPEN
•
HANDLE CLEARANCE: 2.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
END ITEM IDENTIFICATIONW/S: IFF AIMS MK XII; AIRCRAFT, STRATOFORTRESS B-52
HOLE DIAMETER0.193 INCHES NOMINAL IN
DISTANCE BETWEEN ENDS1.000 INCHES NOMINAL IN
MOUNTING PLATE STYLERAISED
SURFACE TREATMENTZINC OVERALL
STYLE DESIGNATORDELTA OPEN
HANDLE CLEARANCE2.063 INCHES NOMINAL IN
PLATE WIDTH3.000 INCHES NOMINAL IN
MOUNTING METHODMOUNTING PLATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
12054-1Upgraded Successor
successor cross-reference
successor
12054Upgraded Successor
successor cross-reference
successor
MIL-C-5015Interchangeable
interchangeable cross-reference
interchangeable
MS3106A20-29PInterchangeable
interchangeable cross-reference
interchangeable
AN3106A20-29PInterchangeable
interchangeable cross-reference
interchangeable
2088016-32Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8800770?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8800770?
8800770 is a HANDLE,BAIL.
What parts can replace 8800770?
There are 15 known substitutes for 8800770: 12054-1, 12054, MIL-C-5015 and 12 more. Substitute compatibility should be verified for your specific system.
Is 8800770 still available?
8800770 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8800770

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026