88-22634 — FASTENER,TRIM,RIBBED

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

88-22634: FASTENER,TRIM,RIBBED.

The FASTENER,TRIM,RIBBED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON BARREL, head_height: 0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN, head_diameter: 0.990 INCHES MINIMUM AND 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM1.010 INCHES MAXIMUM IN, fastener_style: PUSH-IN, FLAT HEADPUSH-IN, FLAT HEAD, special_features: MATERIAL IS NYLON 6;COLOR IS BLACKMATERIAL IS NYLON 6;COLOR IS BLACK, fastener_shank_length: 1.440 INCHES NOMINAL1.440 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-725-1170, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

88-22634

NSN: 5340-00-725-1170
NIINs: 007251170, 014704146
FSC: 5340 — Hardware, Commercial
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)

SPECIFICATIONS

material	PLASTIC POLYAMIDE NYLON BARREL
head_height	0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN
head_diameter	0.990 INCHES MINIMUM AND 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM1.010 INCHES MAXIMUM IN
fastener_style	PUSH-IN, FLAT HEADPUSH-IN, FLAT HEAD
special_features	MATERIAL IS NYLON 6;COLOR IS BLACKMATERIAL IS NYLON 6;COLOR IS BLACK
fastener_shank_length	1.440 INCHES NOMINAL1.440 INCHES NOMINAL IN
end_item_identification	6115-01-462-0291;60 KW TQG GENERATOR FAMILY6115-01-462-0291;60 KW TQG GENERATOR FAMILY
fastener_material_hole_diameter	0.245 INCHES MINIMUM AND 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM0.255 INCHES MAXIMUM IN
material_accommodated_thickness	0.650 INCHES MINIMUM AND 0.650 INCHES MINIMUM AND 1.250 INCHES MAXIMUM1.250 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agency	CLIP,PANELCLIP,PANEL
NSN	5340-00-725-1170

COMPONENT DIAGRAM

KEY FEATURES

•

LOCKING MECHANISM TYPE: PIN TUMBLER

•

DESIGN TYPE: LATCH BOLT

•

SHAPE: OVAL BAR

•

FEATURES PROVIDED: RELEASE BAR AND DEPRESSED POSITION BAR HOLDING DEVICE

•

BOLT TYPE: REVERSE BEVEL

•

MATERIAL: COPPER ALLOY CASE

TECHNICAL CHARACTERISTICS

LOCKING MECHANISM TYPE	PIN TUMBLER
DESIGN TYPE	LATCH BOLT
SHAPE	OVAL BAR
FEATURES PROVIDED	RELEASE BAR AND DEPRESSED POSITION BAR HOLDING DEVICE
BOLT TYPE	REVERSE BEVEL
SPECIAL FEATURES	COMPONENT AND QTY:STRIKE 1;BAR WIDTH:0.891 IN.NOM;SUPPORTING CASE HEIGHT:0.391 IN.NOM;SUPPORTING CASE WIDTH:1.969 IN.NOM;BACKSET DEPTH:0.656 IN.NOM;KEY CHANGE QTY:4000;MASTER KEY PROVISION:NOT INCLUDED; IN
MATERIAL	COPPER ALLOY CASE
MATERIAL	COPPER ALLOY BAR
OPERATION METHOD	KEY WHEN STOP IS SET LATCH BOLT
THICKNESS	0.203 INCHES NOMINAL BAR IN

SUBSTITUTES & CROSS-REFERENCES 1

0666 1-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 88-22634?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 88-22634?

88-22634 is a FASTENER,TRIM,RIBBED.

What parts can replace 88-22634?

There is 1 known substitute for 88-22634: 0666 1-2. Substitute compatibility should be verified for your specific system.

What is the NSN for 88-22634?

88-22634 is cataloged in the U.S. Government catalog under NSN 5340-00-725-1170. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

88-22634 — FASTENER,TRIM,RIBBED

Request a Quote — 88-22634