PartsTable
Technical Data Sheet
Download PDF

88-22331-3 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

88-22331-3: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 6.1 MILLIMETERS MINIMUM AND 6.5 MILLIMETERS MAXIMUM MM, heat_treatment: HARDENED AND TEMPERED, hardness_rating: 44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM, outside_diameter: 11.8 MILLIMETERS MAXIMUM MM, style_designator: SPLIT HELICAL-RIGHT HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-195-6611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
88-22331-3
NSN: 5310-01-195-6611
FSC: 5310 — Nuts and Washers
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter6.1 MILLIMETERS MINIMUM AND 6.5 MILLIMETERS MAXIMUM MM
heat_treatmentHARDENED AND TEMPERED
hardness_rating44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
outside_diameter11.8 MILLIMETERS MAXIMUM MM
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness1.5 MILLIMETERS MINIMUM AND 1.7 MILLIMETERS MAXIMUM MM
NSN5310-01-195-6611
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 88-22331-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAT TREATMENT: HARDENED AND TEMPERED
•
HARDNESS RATING: 44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 11.8 MILLIMETERS MAXIMUM MM
•
MATERIAL THICKNESS: 1.5 MILLIMETERS MINIMUM AND 1.7 MILLIMETERS MAXIMUM MM
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 6.1 MILLIMETERS MINIMUM AND 6.5 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS
HEAT TREATMENTHARDENED AND TEMPERED
HARDNESS RATING44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER11.8 MILLIMETERS MAXIMUM MM
MATERIAL THICKNESS1.5 MILLIMETERS MINIMUM AND 1.7 MILLIMETERS MAXIMUM MM
MATERIALSTEEL OVERALL
HOLE DIAMETER6.1 MILLIMETERS MINIMUM AND 6.5 MILLIMETERS MAXIMUM MM
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
DIN127-ST6MMSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 88-22331-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88-22331-3?
88-22331-3 is a WASHER,LOCK.
What parts can replace 88-22331-3?
There is 1 known substitute for 88-22331-3: DIN127-ST6MM. Substitute compatibility should be verified for your specific system.
What is the NSN for 88-22331-3?
88-22331-3 is cataloged in the U.S. Government catalog under NSN 5310-01-195-6611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88-22331-3