PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 88-20033-5C
88-20033-5C ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 OR STEEL COMP 347 OVERALL, thickness: 0.027 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN, hole_diameter: 0.156 INCHES NOMINAL IN, overall_diameter: 0.312 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-478-6344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
88-20033-5C
NSN: 5310-01-478-6344
FSC: 5310
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
materialSTEEL COMP 321 OR STEEL COMP 347 OVERALL
thickness0.027 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
hole_diameter0.156 INCHES NOMINAL IN
overall_diameter0.312 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification6115-01-431-3063;GENERATOR SET,DIESEL ENIGINE
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationAMS 5510,UNS S32100 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512,UNS S34700 ASSN STD 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationASTM A 380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-478-6344
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 88-20033-5C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A 380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL COMP 321 OR STEEL COMP 347 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.156 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510,UNS S32100 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512,UNS S34700 ASSN STD 2ND MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A 380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL COMP 321 OR STEEL COMP 347 OVERALL
CENTER HOLE SHAPE STYLEROUND
SURFACE TREATMENTPASSIVATE OVERALL
END ITEM IDENTIFICATION6115-01-431-3063;GENERATOR SET,DIESEL ENIGINE
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.156 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510,UNS S32100 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512,UNS S34700 ASSN STD 2ND MATERIAL RESPONSE OVERALL
THICKNESS0.027 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
88-20564-12Interchangeable
interchangeable cross-reference
interchangeable
88-20033-25AInterchangeable
interchangeable cross-reference
interchangeable
MS51412-25Interchangeable
interchangeable cross-reference
interchangeable
1DD598Interchangeable
interchangeable cross-reference
interchangeable
88-20033Interchangeable
interchangeable cross-reference
interchangeable
HFLW025EGInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 88-20033-5C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88-20033-5C?
88-20033-5C is a WASHER,FLAT.
What parts can replace 88-20033-5C?
There are 16 known substitutes for 88-20033-5C: 88-20564-12, 88-20033-25A, MS51412-25 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 88-20033-5C?
88-20033-5C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-478-6344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88-20033-5C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026