PartsTable
Technical Data Sheet
Download PDF

88-0-TPR-CB-SCAFFOLD — CASTER,SWIVEL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

88-0-TPR-CB-SCAFFOLD: CASTER,SWIVEL.

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: STEEL BODY, stem_style: GRIPNECK, wheel_type: SOLID, stem_length: 4.000 INCHES NOMINAL IN, tread_width: 2.000 INCHES NOMINAL IN, stem_diameter: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-244-4796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
88-0-TPR-CB-SCAFFOLD
NSN: 5340-01-244-4796
FSC: 5340 — Hardware, Commercial
CAGE: 71823 — DARNELL CORPORATION (USA)
SPECIFICATIONS
materialSTEEL BODY
stem_styleGRIPNECK
wheel_typeSOLID
stem_length4.000 INCHES NOMINAL IN
tread_width2.000 INCHES NOMINAL IN
stem_diameter1.375 INCHES NOMINAL IN
wheel_diameter8.000 INCHES NOMINAL IN
wheel_quantity1
effective_height9.750 INCHES NOMINAL IN
style_designatorSWIVEL OFFSET
surface_treatmentZINC BODY
wheel_bearing_typeROLLER
NSN5340-01-244-4796
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 88-0-TPR-CB-SCAFFOLD MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STEM DIAMETER: 1.375 INCHES NOMINAL IN
•
STEM LENGTH: 4.000 INCHES NOMINAL IN
•
TREAD WIDTH: 2.000 INCHES NOMINAL IN
•
WHEEL TYPE: SOLID
•
STYLE DESIGNATOR: SWIVEL OFFSET
•
STEM STYLE: GRIPNECK
•
WHEEL QUANTITY: 1
•
EFFECTIVE HEIGHT: 9.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STEM DIAMETER1.375 INCHES NOMINAL IN
STEM LENGTH4.000 INCHES NOMINAL IN
TREAD WIDTH2.000 INCHES NOMINAL IN
WHEEL TYPESOLID
STYLE DESIGNATORSWIVEL OFFSET
STEM STYLEGRIPNECK
WHEEL QUANTITY1
EFFECTIVE HEIGHT9.750 INCHES NOMINAL IN
SAFE OPERATING LOAD RATING1000.0 POUNDS MAXIMUM LBS
SURFACE TREATMENTZINC BODY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
00-88-TPR-CB SC AFF0LDReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 88-0-TPR-CB-SCAFFOLD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88-0-TPR-CB-SCAFFOLD?
88-0-TPR-CB-SCAFFOLD is a CASTER,SWIVEL.
What parts can replace 88-0-TPR-CB-SCAFFOLD?
There is 1 known substitute for 88-0-TPR-CB-SCAFFOLD: 00-88-TPR-CB SC AFF0LD. Substitute compatibility should be verified for your specific system.
What is the NSN for 88-0-TPR-CB-SCAFFOLD?
88-0-TPR-CB-SCAFFOLD is cataloged in the U.S. Government catalog under NSN 5340-01-244-4796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88-0-TPR-CB-SCAFFOLD

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.