PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 87926H
87926H ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.312 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 3.812 INCHES NOMINAL IN, bolt_circle_diameter: 4.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-425-7127, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87926H
NSN: 5330-00-425-7127
FSC: 5330
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.312 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter3.812 INCHES NOMINAL IN
bolt_hole_quantity4
bolt_circle_diameter4.438 INCHES NOMINAL IN
outside_corner_radius0.438 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center2.250 INCHES NOMINAL IN
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-425-7127
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 87926H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 4
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
BOLT CIRCLE DIAMETER: 4.438 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY4
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
BOLT CIRCLE DIAMETER4.438 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL WIDTH5.312 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
HOLE DIAMETER0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER3.812 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
5348Interchangeable
interchangeable cross-reference
interchangeable
J7518Interchangeable
interchangeable cross-reference
interchangeable
E1S098-101Interchangeable
interchangeable cross-reference
interchangeable
3308-3Interchangeable
interchangeable cross-reference
interchangeable
534-48Interchangeable
interchangeable cross-reference
interchangeable
534P34Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 87926H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87926H?
87926H is a GASKET.
What parts can replace 87926H?
There are 11 known substitutes for 87926H: 5348, J7518, E1S098-101 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 87926H?
87926H is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-425-7127. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87926H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026