PartsTable
Technical Data Sheet
Download PDF

879034C1 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

879034C1: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, diameter: 2.000 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: L SHAPE, head_width: 4.625 INCHES NOMINAL IN, head_length: 3.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-927-4949, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
879034C1
NSN: 5315-00-927-4949
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
diameter2.000 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleL SHAPE
head_width4.625 INCHES NOMINAL IN
head_length3.000 INCHES NOMINAL IN
chamfer_length0.375 INCHES NOMINAL IN
special_features1.125 IN. DIA HOLE IN HEAD IN
style_designatorSTRAIGHT
pin_chamfer_angle30.0 DEGREES NOMINAL
under_head_length6.000 INCHES NOMINAL IN
NSN5315-00-927-4949
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 879034C1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.375 INCHES NOMINAL IN
•
HEAD WIDTH: 4.625 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 6.000 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 30.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: STRAIGHT
•
DIAMETER: 2.000 INCHES NOMINAL IN
•
HEAD STYLE: L SHAPE
•
HEAD LENGTH: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.375 INCHES NOMINAL IN
HEAD WIDTH4.625 INCHES NOMINAL IN
UNDER HEAD LENGTH6.000 INCHES NOMINAL IN
PIN CHAMFER ANGLE30.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
DIAMETER2.000 INCHES NOMINAL IN
HEAD STYLEL SHAPE
HEAD LENGTH3.000 INCHES NOMINAL IN
HEIGHT0.250 INCHES NOMINAL IN
SPECIAL FEATURES1.125 IN. DIA HOLE IN HEAD IN
SUBSTITUTES & CROSS-REFERENCES 1
179521Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 879034C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 879034C1?
879034C1 is a PIN,STRAIGHT,HEADED.
What parts can replace 879034C1?
There is 1 known substitute for 879034C1: 179521. Substitute compatibility should be verified for your specific system.
What is the NSN for 879034C1?
879034C1 is cataloged in the U.S. Government catalog under NSN 5315-00-927-4949. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 879034C1