PartsTable / COMPONENT / 8775R1
8775R1
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.125 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, housing_bore_diameter: 1.000 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-983-4370, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
8775R1
NSN: 5330-00-983-4370 FSC: 5330 CAGE: 92679 — NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.125 INCHES NOMINAL IN temp_rating -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF housing_bore_diameter 1.000 INCHES NOMINAL IN sealing_element_style VERTICAL accommodated_shaft_diameter 0.750 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 1000 FEET PER MINUTE FT NSN 5330-00-983-4370
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 8775R1
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
• SEALING ELEMENT STYLE: VERTICAL
• ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 1.000 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
• SEAL WIDTH: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF SEALING ELEMENT STYLE VERTICAL ACCOMMODATED SHAFT DIAMETER 0.750 INCHES NOMINAL IN MATERIAL STEEL CASE HOUSING BORE DIAMETER 1.000 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT MAXIMUM RATED SPEED 1000 FEET PER MINUTE FT SEAL WIDTH 0.125 INCHES NOMINAL IN CASE STYLE SQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
61082 Interchangeable interchangeable cross-reference
interchangeable
69545 Interchangeable interchangeable cross-reference
interchangeable
62750 Interchangeable interchangeable cross-reference
interchangeable
12096-6 Interchangeable interchangeable cross-reference
interchangeable
79293 Interchangeable interchangeable cross-reference
interchangeable
C2-550 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 8775R1?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8775R1?
8775R1 is a SEAL,PLAIN ENCASED.
What parts can replace 8775R1?
There are 22 known substitutes for 8775R1: 61082, 69545, 62750 and 19 more. Substitute compatibility should be verified for your specific system.
Is 8775R1 still available?
8775R1 is currently cancelled.