PartsTable
Technical Data Sheet
Download PDF

877545 — TABLE,TILT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

877545: TABLE,TILT.

The TABLE,TILT is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, hole_diameter: 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN, overall_width: 1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN, major_thickness: 0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN, minor_thickness: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, special_features: CASTING. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-596-9515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
877545
NSN: 5310-00-596-9515
NIINs: 005969515, 006049476
FSC: 5310 — Nuts and Washers
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
materialIRON OVERALL
hole_diameter0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
overall_width1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
major_thickness0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
minor_thickness0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
special_featuresCASTING
style_designatorBEVEL
flat_side_distance_between_thick_and_thin_edges1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
NSN5310-00-596-9515
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 877545 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINOR THICKNESS: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BEVEL
•
MAJOR THICKNESS: 0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
•
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES: 1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
•
MATERIAL: IRON OVERALL
•
HOLE DIAMETER: 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MINOR THICKNESS0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
STYLE DESIGNATORBEVEL
OVERALL WIDTH1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
MAJOR THICKNESS0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
SPECIAL FEATURESCASTING
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
MATERIALIRON OVERALL
HOLE DIAMETER0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
5-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
871071100Reference document
Same NSN cross-reference
Reference document — Secondary reference
902160-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 877545?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 877545?
877545 is a TABLE,TILT.
What parts can replace 877545?
There are 3 known substitutes for 877545: 5-8, 871071100, 902160-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 877545?
877545 is cataloged in the U.S. Government catalog under NSN 5310-00-596-9515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 877545

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.