PartsTable
Technical Data Sheet
Download PDF

8769067 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8769067: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 0.605 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.812 INCHES NOMINAL IN, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-561-2001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8769067
NSN: 5310-00-561-2001
FSC: 5310 — Nuts and Washers
CAGE: 19206 — ARMY, UNITED STATES DEPARTMENT OF THE DBA WATERVLIET ARSENAL DIV BUSINESS DEVELOPMENT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter0.605 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.812 INCHES NOMINAL IN
thread_seriesUNF
thread_directionRIGHT-HAND
drive_point_depth0.125 INCHES NOMINAL IN
drive_point_width0.109 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OVERALL
small_end_diameter0.496 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
undercut_thickness0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
NSN5310-00-561-2001
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8769067 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
DRIVE POINT WIDTH: 0.109 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT DIAMETER: 0.605 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.125 INCHES NOMINAL IN
•
UNDERCUT THICKNESS: 0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
DRIVE POINT WIDTH0.109 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT DIAMETER0.605 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.125 INCHES NOMINAL IN
UNDERCUT THICKNESS0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
NUT THICKNESS0.812 INCHES NOMINAL IN
SMALL END DIAMETER0.496 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SURFACE TREATMENTPHOSPHATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
8769450Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
730999Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7309258Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8769067?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8769067?
8769067 is a NUT,PLAIN,ROUND.
What parts can replace 8769067?
There are 3 known substitutes for 8769067: 8769450, 730999, 7309258. Substitute compatibility should be verified for your specific system.
What is the NSN for 8769067?
8769067 is cataloged in the U.S. Government catalog under NSN 5310-00-561-2001. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8769067

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.