PartsTable
Technical Data Sheet
Download PDF

8765952 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8765952: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 8.000 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 1.750 INCHES NOMINAL IN, thread_series: UNS. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-678-4312, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8765952
NSN: 5310-00-678-4312
FSC: 5310 — Nuts and Washers
CAGE: 19206 — ARMY, UNITED STATES DEPARTMENT OF THE DBA WATERVLIET ARSENAL DIV BUSINESS DEVELOPMENT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter8.000 INCHES NOMINAL IN
thread_class2B
nut_thickness1.750 INCHES NOMINAL IN
thread_seriesUNS
hardness_rating150.0 BRINELL HULTGREN MINIMUM AND 242.0 BRINELL HULTGREN MAXIMUM
thread_directionRIGHT-HAND
drive_point_depth0.437 INCHES NOMINAL IN
drive_point_width0.500 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
surface_treatmentPHOSPHATE OVERALL
small_end_diameter7.290 INCHES NOMINAL IN
NSN5310-00-678-4312
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8765952 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNS
•
HARDNESS RATING: 150.0 BRINELL HULTGREN MINIMUM AND 242.0 BRINELL HULTGREN MAXIMUM
•
HOLE CONFIGURATION STYLE: CONFIGURATION F
•
DRIVE POINT WIDTH: 0.500 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 6.250 INCHES IN
•
NUT DIAMETER: 8.000 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.437 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNS
HARDNESS RATING150.0 BRINELL HULTGREN MINIMUM AND 242.0 BRINELL HULTGREN MAXIMUM
HOLE CONFIGURATION STYLECONFIGURATION F
DRIVE POINT WIDTH0.500 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE6.250 INCHES IN
NUT DIAMETER8.000 INCHES NOMINAL IN
DRIVE POINT DEPTH0.437 INCHES NOMINAL IN
UNDERCUT THICKNESS0.687 INCHES NOMINAL IN
NUT THICKNESS1.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
5310006784312Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8765952?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8765952?
8765952 is a NUT,PLAIN,ROUND.
What parts can replace 8765952?
There is 1 known substitute for 8765952: 5310006784312. Substitute compatibility should be verified for your specific system.
What is the NSN for 8765952?
8765952 is cataloged in the U.S. Government catalog under NSN 5310-00-678-4312. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8765952