PartsTable / COMPONENT / 87656
87656
✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SHAFT,SHEAVE is a Clementoni industrial component. Key specifications include material: STEEL CASE, case_style: FLANGED, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 3.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-224-1090, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
87656
NSN: 5330-00-224-1090 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material STEEL CASE case_style FLANGED seal_width 0.500 INCHES NOMINAL IN housing_bore_diameter 3.500 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 2.500 INCHES NOMINAL IN NSN 5330-00-224-1090
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 87656
MFR: Clementoni
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HOUSING BORE DIAMETER: 3.500 INCHES NOMINAL IN
• SEAL WIDTH: 0.438 INCHES NOMINAL IN
• TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
• ACCOMMODATED SHAFT DIAMETER: 2.500 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR-OPPOSED
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER 3.500 INCHES NOMINAL IN SEAL WIDTH 0.438 INCHES NOMINAL IN TEMP RATING -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF MATERIAL RUBBER SYNTHETIC SEALING ELEMENT A CASE STYLE SQUARE MATERIAL RUBBER SYNTHETIC SEALING ELEMENT B ACCOMMODATED SHAFT DIAMETER 2.500 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR-OPPOSED SURFACE TREATMENT PLASTIC CASE MATERIAL STEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
24988 Interchangeable interchangeable cross-reference
interchangeable
15147 Interchangeable interchangeable cross-reference
interchangeable
237G116 Interchangeable interchangeable cross-reference
interchangeable
226237G116 Interchangeable interchangeable cross-reference
interchangeable
151-155 Interchangeable interchangeable cross-reference
interchangeable
121581 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 87656?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87656?
87656 is a SHAFT,SHEAVE manufactured by Clementoni.
What parts can replace 87656?
There are 19 known substitutes for 87656: 24988, 15147, 237G116 and 16 more. Substitute compatibility should be verified for your specific system.
Is 87656 still available?
87656 is currently cancelled.