PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 87603X3097C
87603X3097C ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include end_item_identification: VNXL FAN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-713-3262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87603X3097C
NSN: 3110-00-713-3262
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
end_item_identificationVNXL FAN
NSN3110-00-713-3262
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 87603X3097C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
SEAL QUANTITY: 1
•
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL MM
•
SHIELD QUANTITY: 1
•
INNER RING WIDTH: 0.5910 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
SEAL QUANTITY1
OVERALL OUTSIDE DIAMETER47.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH0.6300 INCHES NOMINAL IN
SHIELD QUANTITY1
INNER RING WIDTH0.5910 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
2650-2230GP2 ITEM 62Interchangeable
interchangeable cross-reference
interchangeable
M17931-G012Interchangeable
interchangeable cross-reference
interchangeable
87603X3097CInterchangeable
interchangeable cross-reference
interchangeable
11AB58BInterchangeable
Same NIIN cross-reference
interchangeable
AB8538-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 87603X3097C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87603X3097C?
87603X3097C is a BEARING,BALL,ANNULAR.
What parts can replace 87603X3097C?
There are 5 known substitutes for 87603X3097C: 2650-2230GP2 ITEM 62, M17931-G012, 87603X3097C and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 87603X3097C?
87603X3097C is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-713-3262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87603X3097C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026