PartsTable
Technical Data Sheet
Download PDF

87602 — CUTTER BIT,TOOL HOLDER

✓ Government record, cited
InLine · ORING SEAL
PRODUCT OVERVIEW

87602: CUTTER BIT,TOOL HOLDER.

- LWL Duplex cable. - MTRJ plug to 2x LC plug. - Thread: 50/125µm, OM2.

- No halogen. Key specifications include material: RUBBER, center_hole_diameter: 3.520 INCHES MINIMUM AND 3.550 INCHES MAXIMUM IN, cross-sectional_height: 0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-551-1909, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87602
NSN: 5331-00-551-1909
NIINs: 005511909, 013314352
FSC: 5331 — O-ring
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter3.520 INCHES MINIMUM AND 3.550 INCHES MAXIMUM IN
cross-sectional_height0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
NSN5331-00-551-1909
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 87602 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.520 INCHES MINIMUM AND 3.550 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.520 INCHES MINIMUM AND 3.550 INCHES MAXIMUM IN
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 87602?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87602?
87602 is a CUTTER BIT,TOOL HOLDER manufactured by InLine.
What is the NSN for 87602?
87602 is cataloged in the U.S. Government catalog under NSN 5331-00-551-1909. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87602

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.