PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8760106
8760106 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The PLATE,RETAINING,BEARING is a the manufacturer industrial component. Key specifications include width: 7.125 INCHES NOMINAL IN, length: 7.625 INCHES NOMINAL IN, material: STEEL OVERALL, style_designator: RECTANGLE, aperture_diameter: 4.938 INCHES MINIMUM AND 5.125 INCHES MAXIMUM IN, overall_thickness: 7.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-018-2818, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8760106
NSN: 3110-00-018-2818
FSC: 3110
CAGE: 63117 — SICARD A DIVISION OF SMI-SNOWBLAST INC DBA SICARD (USA)
SPECIFICATIONS
width7.125 INCHES NOMINAL IN
length7.625 INCHES NOMINAL IN
materialSTEEL OVERALL
style_designatorRECTANGLE
aperture_diameter4.938 INCHES MINIMUM AND 5.125 INCHES MAXIMUM IN
overall_thickness7.000 INCHES NOMINAL IN
raised_surface_height3.500 INCHES NOMINAL IN
bolt_circle_hole_quantity4
cross-sectional_shape_styleRAISED SURFACE W/ APERTURE
outside_raised_surface_diameter5.875 INCHES NOMINAL IN
NSN3110-00-018-2818
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 8760106 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
APERTURE DIAMETER: 4.938 INCHES MINIMUM AND 5.125 INCHES MAXIMUM IN
•
OVERALL THICKNESS: 7.000 INCHES NOMINAL IN
•
OUTSIDE RAISED SURFACE DIAMETER: 5.875 INCHES NOMINAL IN
•
WIDTH: 7.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGLE
•
BOLT CIRCLE HOLE QUANTITY: 4
•
CROSS-SECTIONAL SHAPE STYLE: RAISED SURFACE W/ APERTURE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
APERTURE DIAMETER4.938 INCHES MINIMUM AND 5.125 INCHES MAXIMUM IN
OVERALL THICKNESS7.000 INCHES NOMINAL IN
OUTSIDE RAISED SURFACE DIAMETER5.875 INCHES NOMINAL IN
WIDTH7.125 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGLE
BOLT CIRCLE HOLE QUANTITY4
CROSS-SECTIONAL SHAPE STYLERAISED SURFACE W/ APERTURE
LENGTH7.625 INCHES NOMINAL IN
RAISED SURFACE HEIGHT3.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
51374Interchangeable
interchangeable cross-reference
interchangeable
1374Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8760106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8760106?
8760106 is a PLATE,RETAINING,BEARING.
What parts can replace 8760106?
There are 2 known substitutes for 8760106: 51374, 1374. Substitute compatibility should be verified for your specific system.
What is the NSN for 8760106?
8760106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-018-2818. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8760106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026