PartsTable
Technical Data Sheet
Download PDF

8758692 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8758692: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include end_radius: 0.470 INCHES NOMINAL IN, fork_depth: 1.120 INCHES NOMINAL IN, hole_diameter: 0.498 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, overall_width: 1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN, shank_diameter: 0.500 INCHES MINIMUM IN, fork_span_width: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-208-3911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8758692
NSN: 5340-01-208-3911
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1022 OR STEEL COMP 1017 OR STEEL COMP 1020 OR STEEL COMP 1029 OR STEEL OR STEEL COMP 1018 OR STEEL COMP 1211 OVERALL
end_radius0.470 INCHES NOMINAL IN
fork_depth1.120 INCHES NOMINAL IN
hole_diameter0.498 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
overall_width1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
shank_diameter0.500 INCHES MINIMUM IN
fork_span_width0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
style_designatorCLEVIS
surface_treatmentZINC AND ZINC AND ZINC OR CHROMATE OR PHOSPHATE OVERALL
fork_arm_thickness0.280 INCHES NOMINAL IN
material_document_and_classificationAISI/SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end7.000 INCHES NOMINAL IN
NSN5340-01-208-3911
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8758692 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.500 INCHES MINIMUM IN
•
FORK SPAN WIDTH: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.280 INCHES NOMINAL IN
•
END RADIUS: 0.470 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI/SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
SURFACE TREATMENT: ZINC AND ZINC AND ZINC OR CHROMATE OR PHOSPHATE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.500 INCHES MINIMUM IN
FORK SPAN WIDTH0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
FORK ARM THICKNESS0.280 INCHES NOMINAL IN
END RADIUS0.470 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAISI/SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
SURFACE TREATMENTZINC AND ZINC AND ZINC OR CHROMATE OR PHOSPHATE OVERALL
MATERIALSTEEL COMP 1010 OR STEEL COMP 1022 OR STEEL COMP 1017 OR STEEL COMP 1020 OR STEEL COMP 1029 OR STEEL OR STEEL COMP 1018 OR STEEL COMP 1211 OVERALL
FORK DEPTH1.120 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8758692?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8758692?
8758692 is a CLEVIS,ROD END.
What is the NSN for 8758692?
8758692 is cataloged in the U.S. Government catalog under NSN 5340-01-208-3911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8758692

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.