PartsTable
Technical Data Sheet
Download PDF

8756352 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8756352: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5086 AND ALUMINUM ALLOY 5083, first_leg_angle: 45.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 9.375 INCHES MINIMUM AND 9.625 INCHES MAXIMUM IN, first_leg_length: 1.250 INCHES NOMINAL IN, second_leg_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-998-4742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8756352
NSN: 5340-00-998-4742
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5086 AND ALUMINUM ALLOY 5083
first_leg_angle45.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width9.375 INCHES MINIMUM AND 9.625 INCHES MAXIMUM IN
first_leg_length1.250 INCHES NOMINAL IN
second_leg_angle45.0 DEGREES NOMINAL
style_designatorADJACENT ANGLES
second_leg_length1.250 INCHES NOMINAL IN
first_leg_thickness0.094 INCHES NOMINAL IN
center_section_width9.375 INCHES MINIMUM AND 9.625 INCHES MAXIMUM IN
second_leg_thickness0.094 INCHES NOMINAL IN
center_section_height2.063 INCHES NOMINAL IN
NSN5340-00-998-4742
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8756352 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.375 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 45.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.094 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 7.500 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG ANGLE: 45.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.375 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.375 INCHES NOMINAL IN
FIRST LEG ANGLE45.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.094 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH7.500 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG ANGLE45.0 DEGREES NOMINAL
SECOND LEG LENGTH1.250 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
CENTER SECTION WIDTH9.375 INCHES MINIMUM AND 9.625 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
2510009984742Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8756352?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8756352?
8756352 is a BRACKET,DOUBLE ANGLE.
What parts can replace 8756352?
There is 1 known substitute for 8756352: 2510009984742. Substitute compatibility should be verified for your specific system.
What is the NSN for 8756352?
8756352 is cataloged in the U.S. Government catalog under NSN 5340-00-998-4742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8756352