PartsTable
Technical Data Sheet
Download PDF

8754130 — CONTROL ASSEMBLY,PUSH-PULL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8754130: CONTROL ASSEMBLY,PUSH-PULL.

The CONTROL ASSEMBLY,PUSH-PULL is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL, core_diameter: 0.054 INCHES NOMINAL IN, core_material: STEEL, hole_diameter: 0.400 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, travel_distance: 3.000 INCHES NOMINAL IN, effective_length: 10.440 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-678-2990, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8754130
NSN: 5330-00-678-2990
NIINs: 006782990, 006783089
FSC: 5330 — Packing and Gasket Materials
CAGE: 22852 — SPALLA INC (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
core_diameter0.054 INCHES NOMINAL IN
core_materialSTEEL
hole_diameter0.400 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
travel_distance3.000 INCHES NOMINAL IN
effective_length10.440 INCHES NOMINAL IN
outside_diameter8.780 INCHES NOMINAL IN
aperture_diameter7.180 INCHES NOMINAL IN
core_constructionSINGLE WIRE
features_providedT-HANDLE AND LOCKING FEATURE AND ADAPTER AND FIXED MOUNTING SHOULDER
bolt_circle_diameter8.000 INCHES NOMINAL IN
fsc_application_data1. MANUAL CONDUIT AND CORE,HAND THROTTLE,ENGINE
NSN5330-00-678-2990
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8754130 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 8.780 INCHES NOMINAL IN
•
APERTURE DIAMETER: 7.180 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 8.000 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
•
HOLE DIAMETER: 0.400 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER8.780 INCHES NOMINAL IN
APERTURE DIAMETER7.180 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER8.000 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
HOLE DIAMETER0.400 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
5330006782990Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 8754130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8754130?
8754130 is a CONTROL ASSEMBLY,PUSH-PULL.
What parts can replace 8754130?
There is 1 known substitute for 8754130: 5330006782990. Substitute compatibility should be verified for your specific system.
What is the NSN for 8754130?
8754130 is cataloged in the U.S. Government catalog under NSN 5330-00-678-2990. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8754130

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.