PartsTable
Technical Data Sheet
Download PDF

8754046 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8754046: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.240 INCHES NOMINAL IN, diameter: 0.730 INCHES NOMINAL IN, head_style: FLAT CHAMFER, chamfer_length: 0.100 INCHES NOMINAL IN, style_designator: STRAIGHT, pin_chamfer_angle: 15.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-678-1405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8754046
NSN: 5315-00-678-1405
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.240 INCHES NOMINAL IN
diameter0.730 INCHES NOMINAL IN
materialSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
head_styleFLAT CHAMFER
chamfer_length0.100 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter1.000 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OVERALL
under_head_length3.000 INCHES NOMINAL IN
first_hole_diameter0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-678-1405
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8754046 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.100 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 3.000 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.100 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH3.000 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.730 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5310006781405Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8754046?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8754046?
8754046 is a PIN,STRAIGHT,HEADED.
What parts can replace 8754046?
There is 1 known substitute for 8754046: 5310006781405. Substitute compatibility should be verified for your specific system.
What is the NSN for 8754046?
8754046 is cataloged in the U.S. Government catalog under NSN 5315-00-678-1405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8754046