PartsTable
Technical Data Sheet
Download PDF

875048 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

875048: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_style: RIGHT ANGLE, CARD, body_width: 0.289 INCHES NOMINAL IN, body_height: 0.238 INCHES NOMINAL IN, bore_diameter: 0.3770 INCHES MINIMUM AND 0.3820 INCHES MAXIMUM IN, overall_width: 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-945-9316, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
875048
NSN: 3110-00-945-9316
NIINs: 009459316, 011865490
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_styleRIGHT ANGLE, CARD
body_width0.289 INCHES NOMINAL IN
body_height0.238 INCHES NOMINAL IN
bore_diameter0.3770 INCHES MINIMUM AND 0.3820 INCHES MAXIMUM IN
overall_width0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
terminal_typeTAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING
overall_length0.784 INCHES NOMINAL IN
insert_materialGLASS AND PLASTIC POLYAMIDE NYLON SINGLE MATING END
outside_diameter1.0600 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN
special_featuresDUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY
style_designatorRADIAL, RETAINER AND CYLINDRICAL ROLLERS
NSN3110-00-945-9316
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 875048 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
STYLE DESIGNATOR: RADIAL, RETAINER AND CYLINDRICAL ROLLERS
•
OUTSIDE DIAMETER: 1.0600 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.3770 INCHES MINIMUM AND 0.3820 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
CRITICALITY CODE JUSTIFICATIONFEAT
STYLE DESIGNATORRADIAL, RETAINER AND CYLINDRICAL ROLLERS
OVERALL WIDTH0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.0600 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN
SPECIAL FEATURESDUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY
BORE DIAMETER0.3770 INCHES MINIMUM AND 0.3820 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
RETAINER PIECE QUANTITY1
SUBSTITUTES & CROSS-REFERENCES 2
875047Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
505716Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 875048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 875048?
875048 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 875048?
There are 2 known substitutes for 875048: 875047, 505716. Substitute compatibility should be verified for your specific system.
What is the NSN for 875048?
875048 is cataloged in the U.S. Government catalog under NSN 3110-00-945-9316. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 875048

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.