PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8746824-01

8746824-01 — Technical Data Sheet

✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OVERALL, corner_shape: SQUARE INSIDE LEFT CORNER, hole_diameter: 0.1880 INCHES NOMINAL FIRST IN, overall_length: 1.3600 INCHES MINIMUM AND 1.3700 INCHES MAXIMUM IN, surface_finish: 200.0 MICROINCHES RIGHT END SURFACE OF BODY, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-662-4272, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8746824-01
NSN: 3120-00-662-4272
FSC: 3120
CAGE: 98747 — OGDEN AIR LOGISTICS CENTER (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
corner_shapeSQUARE INSIDE LEFT CORNER
hole_diameter0.1880 INCHES NOMINAL FIRST IN
overall_length1.3600 INCHES MINIMUM AND 1.3700 INCHES MAXIMUM IN
surface_finish200.0 MICROINCHES RIGHT END SURFACE OF BODY
hardness_rating40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
surface_treatmentCADMIUM LEFT END SURFACE OF BODY
body_inside_diameter0.4245 INCHES MINIMUM AND 0.4265 INCHES MAXIMUM IN
body_outside_diameter0.5635 INCHES MINIMUM AND 0.5645 INCHES MAXIMUM IN
lubricant_accommodation_styleGROOVED CIRCULAR
surface_groove_location_and_quantity1 INTERNAL
NSN3120-00-662-4272
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 8746824-01 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.1880 INCHES NOMINAL FIRST IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
ANTIROTATION/LUBRICATION TYPE AND QUANTITY: 1 HOLE
•
MATERIAL: STEEL COMP 8740 OVERALL
•
CORNER SHAPE: SQUARE INSIDE LEFT CORNER
•
SURFACE FINISH: 200.0 MICROINCHES RIGHT END SURFACE OF BODY
•
BODY INSIDE DIAMETER: 0.4245 INCHES MINIMUM AND 0.4265 INCHES MAXIMUM IN
•
LUBRICANT ACCOMMODATION STYLE: GROOVED CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.1880 INCHES NOMINAL FIRST IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
ANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE
MATERIALSTEEL COMP 8740 OVERALL
CORNER SHAPESQUARE INSIDE LEFT CORNER
SURFACE FINISH200.0 MICROINCHES RIGHT END SURFACE OF BODY
BODY INSIDE DIAMETER0.4245 INCHES MINIMUM AND 0.4265 INCHES MAXIMUM IN
LUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
ST230L2PN013-204Interchangeable
interchangeable cross-reference
interchangeable
93-1518-101-P3Interchangeable
interchangeable cross-reference
interchangeable
229-34523Interchangeable
interchangeable cross-reference
interchangeable
PEI 7126Interchangeable
interchangeable cross-reference
interchangeable
TW71429Interchangeable
interchangeable cross-reference
interchangeable
167421Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8746824-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8746824-01?
8746824-01 is a BEARING,SLEEVE.
What parts can replace 8746824-01?
There are 6 known substitutes for 8746824-01: ST230L2PN013-204, 93-1518-101-P3, 229-34523 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8746824-01?
8746824-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-662-4272. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8746824-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026