PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 874238-1
874238-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 8.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 7.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-1955, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
874238-1
NSN: 5330-00-154-1955
FSC: 5330
CAGE: 28873 — ITW FOOD EQUIPMENT GROUP LLC DBA HOBART SERVICE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
housing_bore_diameter8.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter7.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-1955
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 874238-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 7.000 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 8.500 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SEAL WIDTH0.625 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER7.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER8.500 INCHES NOMINAL IN
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2-1449-36Interchangeable
interchangeable cross-reference
interchangeable
61429ACFGHNVV-4Interchangeable
interchangeable cross-reference
interchangeable
A6902Interchangeable
interchangeable cross-reference
interchangeable
6-14-29Interchangeable
interchangeable cross-reference
interchangeable
1123Interchangeable
interchangeable cross-reference
interchangeable
K6-14-29Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 874238-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 874238-1?
874238-1 is a SEAL,PLAIN ENCASED.
What parts can replace 874238-1?
There are 20 known substitutes for 874238-1: 2-1449-36, 61429ACFGHNVV-4, A6902 and 17 more. Substitute compatibility should be verified for your specific system.
Is 874238-1 still available?
874238-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 874238-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026