PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 87415-0164
87415-0164 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The FLANGE,PIPE,BLIND is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY A, thickness: 1.000 INCHES NOMINAL IN, groove_depth: 0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN, groove_width: 0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN, flange_diameter: 5.750 INCHES NOMINAL IN, special_features: TEST FITTING IS TO HAVE ONE HOLE,0.562-18 UNF-2B,MACHINED IN ACCORDANCE WITH MS16142;TAP DRILL THRU. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-192-3561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87415-0164
NSN: 4730-01-192-3561
FSC: 4730
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialNICKEL ALLOY A
thickness1.000 INCHES NOMINAL IN
groove_depth0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
groove_width0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
flange_diameter5.750 INCHES NOMINAL IN
special_featuresTEST FITTING IS TO HAVE ONE HOLE,0.562-18 UNF-2B,MACHINED IN ACCORDANCE WITH MS16142;TAP DRILL THRU
style_designatorROUND, ONE BOLT HOLE CIRCLE
bolt_hole_diameter0.688 INCHES NOMINAL IN
bolt_hole_quantity6
bolt_circle_diameter4.438 INCHES NOMINAL IN
flange_section_stylePLAIN FACE
groove_pitch_diameter3.500 INCHES NOMINAL IN
NSN4730-01-192-3561
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 87415-0164 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 6
•
BOLT HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 4.438 INCHES NOMINAL IN
•
MATERIAL: NICKEL ALLOY A
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281/CLA,FORM 6 FED SPEC SINGLE MATERIAL RESPONSE
•
GROOVE PITCH DIAMETER: 3.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY6
BOLT HOLE DIAMETER0.688 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER4.438 INCHES NOMINAL IN
MATERIALNICKEL ALLOY A
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281/CLA,FORM 6 FED SPEC SINGLE MATERIAL RESPONSE
GROOVE PITCH DIAMETER3.500 INCHES NOMINAL IN
SPECIAL FEATURESTEST FITTING IS TO HAVE ONE HOLE,0.562-18 UNF-2B,MACHINED IN ACCORDANCE WITH MS16142;TAP DRILL THRU
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
THICKNESS1.000 INCHES NOMINAL IN
GROOVE DEPTH0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
AES01C625E00AW9A91Interchangeable
interchangeable cross-reference
interchangeable
MS90728-176Interchangeable
interchangeable cross-reference
interchangeable
100-4641865Interchangeable
interchangeable cross-reference
interchangeable
87415-0163Interchangeable
interchangeable cross-reference
interchangeable
100-4641865 ITEM 11Interchangeable
interchangeable cross-reference
interchangeable
100-4641865 ITEM 13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 87415-0164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87415-0164?
87415-0164 is a FLANGE,PIPE,BLIND.
What parts can replace 87415-0164?
There are 24 known substitutes for 87415-0164: AES01C625E00AW9A91, MS90728-176, 100-4641865 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 87415-0164?
87415-0164 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-192-3561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87415-0164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026