PartsTable
Technical Data Sheet
Download PDF

8733971 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8733971: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.760 INCHES MINIMUM AND 0.761 INCHES MAXIMUM IN, recess_diameter: 0.792 INCHES MINIMUM AND 0.793 INCHES MAXIMUM IN, outside_diameter: 1.453 INCHES MINIMUM AND 1.484 INCHES MAXIMUM IN, style_designator: RECESSED. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-6149, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8733971
NSN: 5310-00-209-6149
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.760 INCHES MINIMUM AND 0.761 INCHES MAXIMUM IN
recess_diameter0.792 INCHES MINIMUM AND 0.793 INCHES MAXIMUM IN
outside_diameter1.453 INCHES MINIMUM AND 1.484 INCHES MAXIMUM IN
style_designatorRECESSED
material_thickness0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
NSN5310-00-209-6149
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8733971 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECESSED
•
OUTSIDE DIAMETER: 1.453 INCHES MINIMUM AND 1.484 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.792 INCHES MINIMUM AND 0.793 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.760 INCHES MINIMUM AND 0.761 INCHES MAXIMUM IN
•
RECESS ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECESSED
OUTSIDE DIAMETER1.453 INCHES MINIMUM AND 1.484 INCHES MAXIMUM IN
MATERIAL THICKNESS0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
RECESS DIAMETER0.792 INCHES MINIMUM AND 0.793 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.760 INCHES MINIMUM AND 0.761 INCHES MAXIMUM IN
RECESS ANGLE90.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
5310002096149Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8733971?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8733971?
8733971 is a WASHER,RECESSED.
What parts can replace 8733971?
There is 1 known substitute for 8733971: 5310002096149. Substitute compatibility should be verified for your specific system.
What is the NSN for 8733971?
8733971 is cataloged in the U.S. Government catalog under NSN 5310-00-209-6149. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8733971