The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CHAMFERED ENDS, first_leg_width: 0.750 INCHES NOMINAL IN, first_leg_length: 0.2500 INCHES NOMINAL IN, second_leg_style: CHAMFERED ENDS. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-330-3564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
873369
NSN:5340-00-330-3564 FSC:5340 — Hardware, Commercial CAGE:56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
CHAMFERED ENDS
first_leg_width
0.750 INCHES NOMINAL IN
first_leg_length
0.2500 INCHES NOMINAL IN
second_leg_style
CHAMFERED ENDS
second_leg_width
0.750 INCHES NOMINAL IN
special_features
2ND LEG HAS 0.250 IN. WITH SLOT CENTERED IN EDGE ALONG WIDTH THRU TO HOLE; HOLE HAS KEYWAY AT 30 DEG ANGLE FROM CENTER OF WIDTH AT BEND IN
style_designator
ANGLE
second_leg_length
1.0000 INCHES NOMINAL IN
surface_treatment
ENAMEL
first_leg_end_width
0.562 INCHES NOMINAL IN
NSN
5340-00-330-3564
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.188 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.164 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.375 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.512 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-E-15090 TYPE 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.375 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.188 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.164 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.375 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.512 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-E-15090 TYPE 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
0.750 INCHES NOMINAL IN
SECOND LEG LENGTH
1.0000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 873369?
873369 is a BRACKET,ANGLE.
What is the NSN for 873369?
873369 is cataloged in the U.S. Government catalog under NSN 5340-00-330-3564. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.