PartsTable
Technical Data Sheet
Download PDF

8720137 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8720137: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 BAND, overall_width: 0.750 INCHES NOMINAL IN, style_designator: T-BOLT, material_thickness: 0.025 INCHES NOMINAL IN, loop_inside_diameter: 9.438 INCHES NOMINAL IN, material_document_and_classification: MIL-S-50591/4HARDOR1/2HARD MIL SPEC ALL MATERIAL RESPONSES BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-0561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8720137
NSN: 5340-00-598-0561
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 BAND
overall_width0.750 INCHES NOMINAL IN
style_designatorT-BOLT
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter9.438 INCHES NOMINAL IN
material_document_and_classificationMIL-S-50591/4HARDOR1/2HARD MIL SPEC ALL MATERIAL RESPONSES BAND
NSN5340-00-598-0561
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8720137 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-50591/4HARDOR1/2HARD MIL SPEC ALL MATERIAL RESPONSES BAND
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 BAND
•
LOOP INSIDE DIAMETER: 9.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORT-BOLT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-50591/4HARDOR1/2HARD MIL SPEC ALL MATERIAL RESPONSES BAND
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 BAND
LOOP INSIDE DIAMETER9.438 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340005980561Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 8720137?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8720137?
8720137 is a CLAMP,LOOP.
What parts can replace 8720137?
There is 1 known substitute for 8720137: 5340005980561. Substitute compatibility should be verified for your specific system.
What is the NSN for 8720137?
8720137 is cataloged in the U.S. Government catalog under NSN 5340-00-598-0561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8720137