PartsTable
Technical Data Sheet
PartsTable / O-RING / 871152
871152 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLATE,CONVERGENT,ANTERIOR CERVIC. Key specifications include part_name_assigned_by_controlling_agency: PLATE CONVERGENT ANTERIOR CERVICAL PLATE SYSTEM TITANIUM 57.5MM MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-104-7620, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
871152
NSN: 5331-00-104-7620
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
general_characteristics_item_descriptionUSED FOR ANTERIOR CERVICAL INSTABILITY; DURING DEVLOPMENT OF SOLID SPINAL FUSION IN PATIENTS WITH DEGENERATIVE DISEASE, TRUMA, AND POST LAMINECTOMY INSTABILITY; TITANIUM; 57.5 MM MM
part_name_assigned_by_controlling_agencyPLATE CONVERGENT ANTERIOR CERVICAL PLATE SYSTEM TITANIUM 57.5MM MM
NSN5331-00-104-7620
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 871152 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.443 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.443 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
MILP5516Interchangeable
interchangeable cross-reference
interchangeable
5330000546935Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5516Interchangeable
interchangeable cross-reference
interchangeable
200034Interchangeable
interchangeable cross-reference
interchangeable
425276-4Interchangeable
interchangeable cross-reference
interchangeable
B108A39Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 871152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 871152?
871152 is a PLATE,CONVERGENT,ANTERIOR CERVIC.
What parts can replace 871152?
There are 25 known substitutes for 871152: MILP5516, 5330000546935, AMS-P-5516 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 871152?
871152 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-104-7620. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 871152

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026