PartsTable
Technical Data Sheet
PartsTable / O-RING / 871145
871145 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLATE,ANTERIOR CERVICAL IMPLANT. Key specifications include part_name_assigned_by_controlling_agency: PLATE ANTERIOR CERVICAL IMPLANT SYSTEM 45MM MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-815-8860, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
871145
NSN: 5331-00-815-8860
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
special_featuresA TITANIUM ALLOY; CONVERGENCE PLATE WHICH IS USED TO FUSE THE FRONT CERVICAL SPINE; THIS ITEM IS USED IN THE CERVICAL, THORACIC, LUMBAR FIXATION SYSTEM, SURGICAL IMPLANT PROCEDURES, 45 MM MM
part_name_assigned_by_controlling_agencyPLATE ANTERIOR CERVICAL IMPLANT SYSTEM 45MM MM
NSN5331-00-815-8860
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 871145 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.756 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.756 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AMS7276Interchangeable
interchangeable cross-reference
interchangeable
AS3209-145Interchangeable
interchangeable cross-reference
interchangeable
2-145V1164-75Interchangeable
interchangeable cross-reference
interchangeable
284113-0001ITEM63Interchangeable
interchangeable cross-reference
interchangeable
4400571-1450Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-145Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 871145?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 871145?
871145 is a PLATE,ANTERIOR CERVICAL IMPLANT.
What parts can replace 871145?
There are 18 known substitutes for 871145: AMS7276, AS3209-145, 2-145V1164-75 and 15 more. Substitute compatibility should be verified for your specific system.
Is 871145 still available?
871145 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 871145

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026