PartsTable
Technical Data Sheet
PartsTable / MRO / 87106
87106 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: DUAL INLINE, body_width: 0.250 INCHES NOMINAL IN, head_style: ROUND, body_height: 0.120 INCHES MAXIMUM IN, body_length: 0.350 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-275-9838, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 87106
NSN: 5305-00-275-9838
FSC: 5305
CAGE: 08683 — BROCKWAY MOTOR TRUCKS DIV OF MACK TRUCKS INC (USA)
SPECIFICATIONS
materialCERAMIC CASE
body_styleDUAL INLINE
body_width0.250 INCHES NOMINAL IN
head_styleROUND
body_height0.120 INCHES MAXIMUM IN
body_length0.350 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
head_height0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
fastener_length0.500 INCHES NOMINAL IN
NSN5305-00-275-9838
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 87106 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 1S STYLE AND I TYPE
•
HEAD DIAMETER: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
HEAD STYLE: ROUND
•
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: SLOT
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1S STYLE AND I TYPE
HEAD DIAMETER0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
THREAD CLASS2A A
HEAD STYLEROUND
HEAD HEIGHT0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
INTERNAL DRIVE STYLESLOT
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
FASTENER LENGTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
HP1937S83Interchangeable
interchangeable cross-reference
interchangeable
P167Interchangeable
interchangeable cross-reference
interchangeable
24LGInterchangeable
interchangeable cross-reference
interchangeable
15-35JA10Interchangeable
interchangeable cross-reference
interchangeable
B2862Interchangeable
interchangeable cross-reference
interchangeable
35JA10-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 87106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87106?
87106 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 87106?
There are 32 known substitutes for 87106: HP1937S83, P167, 24LG and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 87106?
87106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-275-9838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026