PartsTable
Technical Data Sheet
Download PDF

87034A6070 — NUT,EYE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

87034A6070: NUT,EYE.

The NUT,EYE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: EYE, nut_width: 2.000 INCHES NOMINAL IN, hole_width: 1.000 INCHES NOMINAL IN, hole_height: 1.500 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-067-3422, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87034A6070
NSN: 5310-01-067-3422
FSC: 5310 — Nuts and Washers
CAGE: 01365 — MARINE CORPS SYSTEMS COMMAND DIV MARINE CORPS SYSTEMS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleEYE
nut_width2.000 INCHES NOMINAL IN
hole_width1.000 INCHES NOMINAL IN
hole_height1.500 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height2.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
eye_body_thickness0.375 INCHES NOMINAL IN
fabrication_methodFORGED
NSN5310-01-067-3422
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 87034A6070 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 2.000 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A153 ASSN STD SINGLE TREATMENT RESPONSE OR ASTM B633,TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
EYE BODY THICKNESS: 0.375 INCHES NOMINAL IN
•
HOLE HEIGHT: 1.500 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.500 INCHES NOMINAL IN
NUT WIDTH2.000 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A153 ASSN STD SINGLE TREATMENT RESPONSE OR ASTM B633,TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
EYE BODY THICKNESS0.375 INCHES NOMINAL IN
HOLE HEIGHT1.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
HOLE WIDTH1.000 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
803253-300Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
G-400-3ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
334-2708-030Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 87034A6070?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87034A6070?
87034A6070 is a NUT,EYE.
What parts can replace 87034A6070?
There are 3 known substitutes for 87034A6070: 803253-300, G-400-3A, 334-2708-030. Substitute compatibility should be verified for your specific system.
What is the NSN for 87034A6070?
87034A6070 is cataloged in the U.S. Government catalog under NSN 5310-01-067-3422. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87034A6070

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.