87017 — RESISTOR NETWORK,FIXED,FILM

✓ Government record, cited

Hama · MRO · MRO_GENERAL

PRODUCT OVERVIEW

87017: RESISTOR NETWORK,FIXED,FILM.

- Special charger for batteries with low self-discharge (e.g. Ready4Power) - Suitable for 2/4 standard AA/AAA NiMH batteries - The automatic charge state detection and an effective charging process prevent harmful overcharge and overheating of the batteries (this causes faster self-discharge and shortens the battery life) - Charging cut-off by exact minus delta V detection - Trickle charge, defective battery detection, safety timer - Charging current: AA x 2: 600 mA; AA x 4: 350 mA; AAA 2/4: 350 mA - 100 - 240 V AC; 50/60 Hz - Weight: 100 g - Including 4x AA Ready 4 Power 2100 mAh batteries - Packed in blister This part is cataloged in the U.S. Government catalog under NSN 4310-00-132-5518, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS

MRO→ MRO_GENERAL→ 87017

NSN: 4310-00-132-5518
NIINs: 001325518, 013556929, 013907728, 013929909, 013990557, 014127712, 014127714, 014127715, 014127716, 014128359, 014166398, 014169009, 014173717, 014173721, 014195798, 014293417, 014293418, 014293421, 014293422, 014605502, 014633437, 014633443, 014633446, 014633448, 014641380, 014641382, 014650721, 015089900, 015194963
FSC: 4310 — Compressors and Vacuum Pumps
CAGE: 82722 — WESTINGHOUSE AIR BRAKE TECHNOLOGIES CORP DBA WESTINGHOUSE AIR BRAKE TECHNOLOGIES CORP (USA)

SPECIFICATIONS

material	COPPER ALLOY OVERALL
body_width	0.350 INCHES NOMINAL IN
ring_style	CONCENTRIC
body_height	0.023 INCHES NOMINAL IN
body_length	0.350 INCHES NOMINAL IN
joint_style	VERTICAL JOINT
overall_width	0.1042 INCHES MINIMUM AND 0.1047 INCHES MAXIMUM IN
terminal_type	PIN
terminal_length	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
inclosure_method	ENCAPSULATED
special_features	ECCENTRIC COUNTERBORE 3.804 IN.DIA BY 0.007 TO 0.010 IN DEEP ON MAX RADIAL WALL IN
style_designator	FLAT PACK
NSN	4310-00-132-5518

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL SHAPE STYLE: PLAIN RECTANGULAR, STRAIGHT FACE

•

JOINT STYLE: VERTICAL JOINT

•

RADIAL WALL THICKNESS: 0.1160 INCHES MINIMUM AND 0.1750 INCHES MAXIMUM IN

•

RING STYLE: CONCENTRIC

•

STANDARD BORE DIAMETER: 4.000 INCHES IN

•

MATERIAL: COPPER ALLOY OVERALL

TECHNICAL CHARACTERISTICS

OVERALL WIDTH	0.1042 INCHES MINIMUM AND 0.1047 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE	PLAIN RECTANGULAR, STRAIGHT FACE
JOINT STYLE	VERTICAL JOINT
RADIAL WALL THICKNESS	0.1160 INCHES MINIMUM AND 0.1750 INCHES MAXIMUM IN
RING STYLE	CONCENTRIC
SPECIAL FEATURES	ECCENTRIC COUNTERBORE 3.804 IN.DIA BY 0.007 TO 0.010 IN DEEP ON MAX RADIAL WALL IN
STANDARD BORE DIAMETER	4.000 INCHES IN
MATERIAL	COPPER ALLOY OVERALL

SUBSTITUTES & CROSS-REFERENCES 3

Y1029A2PC25Reference document

Same NSN cross-reference

Reference document — Secondary reference

Y1029C2PC25Reference document

Same NSN cross-reference

Reference document — Secondary reference

Y1029C1PC25Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 87017?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 87017?

87017 is a RESISTOR NETWORK,FIXED,FILM manufactured by Hama. It is classified as a MRO (MRO_GENERAL).

What parts can replace 87017?

There are 3 known substitutes for 87017: Y1029A2PC25, Y1029C2PC25, Y1029C1PC25. Substitute compatibility should be verified for your specific system.

What is the NSN for 87017?

87017 is cataloged in the U.S. Government catalog under NSN 4310-00-132-5518. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

87017 — RESISTOR NETWORK,FIXED,FILM

Request a Quote — 87017