PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 87016X1ELT
87016X1ELT ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL SHIELD, bore_shape: STRAIGHT, bore_diameter: 16.00 MILLIMETERS NOMINAL MM, overall_width: 0.5000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87016X1ELT
NSN: 3110-00-156-3483
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL SHIELD
bore_shapeSTRAIGHT
bore_diameter16.00 MILLIMETERS NOMINAL MM
overall_width0.5000 INCHES NOMINAL IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
inner_ring_width0.4800 INCHES NOMINAL IN
outer_ring_width0.4330 INCHES NOMINAL IN
lubrication_materialGREASE
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-3483
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 87016X1ELT · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SHIELD QUANTITY: 1
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
INNER RING WIDTH: 0.4800 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.4330 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SHIELD QUANTITY1
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
INNER RING WIDTH0.4800 INCHES NOMINAL IN
OUTER RING WIDTH0.4330 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
PER12Interchangeable
interchangeable cross-reference
interchangeable
PF12Interchangeable
interchangeable cross-reference
interchangeable
PH14Interchangeable
interchangeable cross-reference
interchangeable
125X13Interchangeable
interchangeable cross-reference
interchangeable
61-881Interchangeable
interchangeable cross-reference
interchangeable
14274Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 87016X1ELT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87016X1ELT?
87016X1ELT is a BEARING,BALL,ANNULAR.
What parts can replace 87016X1ELT?
There are 22 known substitutes for 87016X1ELT: PER12, PF12, PH14 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 87016X1ELT?
87016X1ELT is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3483. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87016X1ELT

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026