PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 870168-00
870168-00 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM BAND, lug_width: 0.500 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-488-6563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
870168-00
NSN: 5340-00-488-6563
FSC: 5340
CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM BAND
lug_width0.500 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
style_designatorRIGHT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.063 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.797 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.250 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole1.063 INCHES NOMINAL IN
NSN5340-00-488-6563
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 870168-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
MATERIAL: ALUMINUM BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.547 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 1.063 INCHES NOMINAL IN
•
LUG WIDTH: 0.500 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
DIAMETER: 0.199 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
MATERIALALUMINUM BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.547 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE1.063 INCHES NOMINAL IN
LUG WIDTH0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
DIAMETER0.199 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIALRUBBER CUSHION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
7894Upgraded Successor
successor cross-reference
successor
9-660-1-1-2Interchangeable
interchangeable cross-reference
interchangeable
TC1-1/2SPUDInterchangeable
interchangeable cross-reference
interchangeable
901B002Interchangeable
interchangeable cross-reference
interchangeable
27U6421PC1AInterchangeable
interchangeable cross-reference
interchangeable
14U1465PC7894Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 870168-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 870168-00?
870168-00 is a CLAMP,LOOP.
What parts can replace 870168-00?
There are 13 known substitutes for 870168-00: 7894, 9-660-1-1-2, TC1-1/2SPUD and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 870168-00?
870168-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-488-6563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 870168-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026