PartsTable
Technical Data Sheet
Download PDF

87014 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

87014: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include band_width: 2.250 INCHES NOMINAL IN, root_width: 0.255 INCHES NOMINAL IN, latch_style: SINGLE, retainer_width: 0.750 INCHES NOMINAL IN, inside_diameter: 3.060 INCHES NOMINAL IN, included_angle_in_deg: 40.0. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-4173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87014
NSN: 3110-00-156-4173
NIINs: 001564173, 013577524
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
band_width2.250 INCHES NOMINAL IN
root_width0.255 INCHES NOMINAL IN
latch_styleSINGLE
retainer_width0.750 INCHES NOMINAL IN
inside_diameter3.060 INCHES NOMINAL IN
included_angle_in_deg40.0
cross-sectional_shape_styleGROOVED RETAINER
NSN3110-00-156-4173
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 87014 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.5000 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.5000 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER35.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
SUBSTITUTES & CROSS-REFERENCES 2
WC87014CE1SA2Reference document
Same NSN cross-reference
Reference document — Secondary reference
202KDL4FS381AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 87014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87014?
87014 is a BEARING,BALL,ANNULAR.
What parts can replace 87014?
There are 2 known substitutes for 87014: WC87014CE1SA2, 202KDL4FS381A. Substitute compatibility should be verified for your specific system.
What is the NSN for 87014?
87014 is cataloged in the U.S. Government catalog under NSN 3110-00-156-4173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87014