PartsTable
Technical Data Sheet
Download PDF

8701298 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8701298: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.125 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, special_features: 2350-00-122-6826, style_designator: CENTER MOUNT, material_thickness: 0.035 INCHES NOMINAL IN, loop_inside_diameter: 0.938 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-255-0932, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8701298
NSN: 5340-01-255-0932
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.125 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
special_features2350-00-122-6826
style_designatorCENTER MOUNT
material_thickness0.035 INCHES NOMINAL IN
loop_inside_diameter0.938 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.228 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end0.926 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.312 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.040 INCHES NOMINAL IN
NSN5340-01-255-0932
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8701298 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL THICKNESS: 0.035 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.228 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.312 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.040 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
OVERALL WIDTH0.125 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
MATERIAL THICKNESS0.035 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.228 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.312 INCHES NOMINAL IN
SPECIAL FEATURES2350-00-122-6826
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.040 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END0.926 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.938 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8701298?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8701298?
8701298 is a CLAMP,LOOP.
What is the NSN for 8701298?
8701298 is cataloged in the U.S. Government catalog under NSN 5340-01-255-0932. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8701298

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.