PartsTable
Technical Data Sheet
Download PDF

87001F1217 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

87001F1217: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE OVERALL, shank_length: 0.070 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.070 INCHES NOMINAL IN, overall_length: 0.215 INCHES NOMINAL IN, shank_diameter: 0.086 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-396-8068, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87001F1217
NSN: 5315-01-396-8068
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 02387 — NAVAL AIR WARFARE CENTER AIRCRAFT DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE OVERALL
shank_length0.070 INCHES NOMINAL IN
thread_class2A A
thread_length0.070 INCHES NOMINAL IN
overall_length0.215 INCHES NOMINAL IN
shank_diameter0.086 INCHES NOMINAL IN
undercut_width0.025 INCHES NOMINAL IN
first_end_styleSLOTTED
second_end_styleSQUARE
style_designatorUNDERCUT
thread_directionRIGHT-HAND
shoulder_diameter0.125 INCHES NOMINAL IN
NSN5315-01-396-8068
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 87001F1217 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.086 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.025 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.060 INCHES NOMINAL IN
•
FIRST END LOCATION: UNTHREADED END
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END SLOT WIDTH: 0.030 INCHES NOMINAL IN
•
THREAD LENGTH: 0.070 INCHES NOMINAL IN
•
FIRST END STYLE: SLOTTED
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.086 INCHES NOMINAL IN
UNDERCUT WIDTH0.025 INCHES NOMINAL IN
UNDERCUT DIAMETER0.060 INCHES NOMINAL IN
FIRST END LOCATIONUNTHREADED END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END SLOT WIDTH0.030 INCHES NOMINAL IN
THREAD LENGTH0.070 INCHES NOMINAL IN
FIRST END STYLESLOTTED
SHANK LENGTH0.070 INCHES NOMINAL IN
STYLE DESIGNATORUNDERCUT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 87001F1217?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87001F1217?
87001F1217 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 87001F1217?
87001F1217 is cataloged in the U.S. Government catalog under NSN 5315-01-396-8068. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87001F1217

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.