PartsTable
Technical Data Sheet
Download PDF

87-30050-001 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

87-30050-001: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, knuckle_type: FRICTION, pin_diameter: 0.125 INCHES NOMINAL IN, overall_length: 17.250 INCHES NOMINAL IN, knuckle_quantity: 27, performance_type: NOT RATED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-337-0125, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87-30050-001
NSN: 5340-01-337-0125
FSC: 5340 — Hardware, Commercial
CAGE: 33875 — RAYTHEON E-SYSTEMS, INC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
knuckle_typeFRICTION
pin_diameter0.125 INCHES NOMINAL IN
overall_length17.250 INCHES NOMINAL IN
knuckle_quantity27
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
special_features8 OF THE HOLES ARE 0.250 IN. DIA IN
style_designatorBUTT
material_thickness0.060 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
NSN5340-01-337-0125
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 87-30050-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.125 INCHES NOMINAL IN
•
MOUNTING HOLE QUANTITY: 16
•
REVERSIBLE FEATURE: NOT INCLUDED
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 0.750 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: FULL SURFACE
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.125 INCHES NOMINAL IN
MOUNTING HOLE QUANTITY16
REVERSIBLE FEATURENOT INCLUDED
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
OVERALL LENGTH17.250 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE0.750 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 87-30050-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87-30050-001?
87-30050-001 is a HINGE,BUTT.
What is the NSN for 87-30050-001?
87-30050-001 is cataloged in the U.S. Government catalog under NSN 5340-01-337-0125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87-30050-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.